 |
CH&E Trash Pumps Model 2928
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 3” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Cast Iron
Volute: Ductile Iron
|
 |
CH&E Trash Pumps Model 2984
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 2 1/2” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Cast Iron
Volute: Ductile Iron
|
 |
CH&E Trash Pumps Model 2987
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 3” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Cast Iron
Volute: Ductile Iron
|
 |
CH&E Trash Pumps Model 2976
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 3” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Class 30 Cast Iron
Volute: Ductile Iron
|
 |
CH&E Trash Pumps Model 7628
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 3” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Class 30 Cast Iron
Volute: Ductile Iron
|
|
CH&E Trash Pumps Model 7647
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 2 1/2” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Class 30 Cast Iron
Volute: Ductile Iron
|
|
CH&E Trash Pumps Model 7661
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 3” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Class 30 Cast Iron
Volute: Ductile Iron
|
|
CH&E Trash Pumps Model 7662
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane – Passes 3” Spherical Solids
Seal: Double Grease Seal – Spring (SS) Loaded Silicon Carbide Faces
Suction Elbow: Class 30 Cast Iron
Volute: Ductile Iron
|
 |
CH&E Trash Pumps Model 8976 Vac Assist
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane Statically Balanced – 3” Spherical Solid
Seal: Oil Lubricated – SS Spring Silicon Carbide/Tungsten Carbide Faces
Suction Tee: Class 30 Cast Iron
Eductor: Aluminum Vacuum Pump Converts Compressed Air into Reliable Vacuum Power
Preventer: Compound Lever Type Air Release Valve with Protective Screen Stops Backflow to Eductor
Engine: John Deere, Diesel (4) cylinder
Cooling: Liquid
Standard: High temperature/ Low oil Shutdowns – Hour meter Tachometer – Ammeter Oil Pressure and Temp.
|
|
CH&E Trash Pumps Model 8987 Vac Assist
Size: 6” x 6” Female NPT
Construction: Class 30 Cast Iron
Impellar: Ductile Iron – 3 Vane Statically Balanced – 3” Spherical Solid
Seal: Oil Lubricated – SS Spring Silicon Carbide/Tungsten Carbide Faces
Suction Tee: Class 30 Cast Iron
Eductor: Aluminum Vacuum Pump Converts Compressed Air into Reliable Vacuum Power
Preventer: Compound Lever Type Air Release Valve with Protective Screen Stops Backflow to Eductor
Engine: Deutz F4L913, Diesel (4) cylinder
Cooling: Air Cooled
Standard: High temperature/ Low oil Shutdowns – Hour meter Tachometer – Ammeter Oil Pressure and Temp.
|
 |
CH&E Trash Pumps Model 8976TAQMC Vac Assist Eco Quiet
- Close coupled trash pump with vacuum pump priming system that turns compressed air into reliable vacuum power.
- All cast iron construction with abrasion resistant ductile iron impeller and replaceable volute.
- Excellent application versatility – will handle 3” spherical solids, raw sewage, and slurries. Extremely useful in pumping against discharge head pressures. The vacuum pump priming system allows air to vent into the atmosphere until priming occurs.
- Continuous operation is facilitated by an air eductor pump. Factory installed requiring no adjustment and since there’s no moving parts there’s virtually no maintenance
- Dry running is accomplished by using an oil bath mechanical seal with silicon carbide interfaces.
- A full flow discharge check valve prevents back flow and siphoning. Construction is cast iron – the flap valve is Buna rubber and has a top access for convenient care or replacement.
- Heavy duty trailer mounting with 85 gallon fuel tank (standard), easily runs 24 hours without stopping.
- A discharge pressure switch reduces wear and tear by unloading the compressor whilst the pump is discharging. If dry running is required the pressure switch opens a solenoid, and the compressor starts smooth efficient evacuation of air from the suction line.
- A compound lever type air release valve (Preventer) installed in the suction stops backflow and eliminates blow-by. Particularly helpful when pumping form a source above the pump the Preventer stops spillage caused by suction head pressure.
|
6 Inch Trash Pumps With Diesel Engines from CH&E Pumps
